Contact Us

SINCHOLD Port Engineering Co.,Ltd

Tel: 0086-510-83768896

Fax: 0086-510-83768826


Contacts: Shaobo Jia

Add: No.82 Dongzhuang Industrial Park,Yanqiao Street,Huishan District,Wuxi City,Jiangsu Province,P.R.China

Service Hotline


Home > ExhibitionContent

KBK flexible cranes how to assemble?

SINCHOLD Port Engineering Co.,Ltd | Updated: Mar 06, 2017

1, the main beam and beam assembly

First, insert the connecting plate into the middle of the beam gap, the beam at both ends and the middle of the three shaft hole, and then connect the plate hole and the middle of the beam and other aperture alignment, fitted with shaft Ⅱ, and then the card plate can be fixed shaft Ⅱ.

2, beam connection and electric car connection

And then according to the car track width, the use of adjustment pad to adjust the wheel inner edge distance, to ensure that the rim from the track along the 3-5mm.

3, electrical and electrical installation

After the final parts are installed, set up electrical appliances in the correct installation. KBK flexible cranes on all electrical equipment of the metal shell must be effectively grounded, the perpetual use of the crane track as a ground wire. The total earth resistance should not be greater than 4Ω.